popbsmtpd-users
Re: popbsmtpd
> Larry,
>
> So if I understand correctly, what you did below was this:
>
> - Install/configure popbsmtpd on myvietnam, known as myvietnam.org. -
> Pop your mail for account rhs from outside your network (from rr.com). -
> Send mail through myvietnam from outside your network (rr.com again).
>
> The mail you tried to send was rejected because relay access was denied.
>
This is correct.
> I can't see anything wrong with your Postfix config, but the immediate
> disabling of relaying by popbsmtpd is a problem. The duration for which
> relaying is permitted is set in popbsmtpd.conf as follows:
>
> auth_duration = 30
I have this value in popbsmtpd.conf
>
> Make sure this is a positive number; recently someone tried a negative
> number and got the result that you are getting. You can see what
> popbsmtpd thinks it is using with
>
> popbsmtpd -dc
>
> My output looks like this:
>
And mine:
[root_at_myvietnam /etc]# /usr/sbin/popbsmtpd -dc
source_log = /var/log/pop-imap-login.log
auth_db = /etc/postfix/pop-before-smtp.db
login_db = /etc/postfix/pop-before-smtp-logins.db
mynetworks = 192.168.1.
auth_duration = 30
sleep_duration = 3600
log_facility = LOG_MAIL
log_level = 1
secure-pop { enabled
multiline = 1
daemon = "stunnel"
string = "spop3 connected from"
ip_daemon = "stunnel"
ip_string = "spop3 connected from"
ip_scan = "spop3 connected from %[^:]:%*d"
user_daemon = "spop3"
user_string = "Login user="
user_scan = "Login user=%s host=%*s [%*[^]]]"
fail_daemon = "spop3"
fail_string = "spop3"
}
>
> If this does not point out the problem, you can stop the daemon and run
> it from the command line with more verbose logging, and see if that
> shows up anything:
>
> popbsmtpd --loglevel=3
[root_at_myvietnam /etc]# /usr/sbin/popbsmtpd --loglevel=3
popbsmtpd: Opened configuration file /etc/popbsmtpd.conf
popbsmtpd: Closed configuration file
popbsmtpd: Command line arguments:
popbsmtpd: Run as daemon: No
popbsmtpd: Configuration file: /etc/popbsmtpd.conf
popbsmtpd: PID file: /var/run/popbsmtpd.pid
popbsmtpd: Configuration directives:
popbsmtpd: Source log: /var/log/pop-imap-login.log
popbsmtpd: Authorization DB: /etc/postfix/pop-before-smtp.db
popbsmtpd: Login DB: /etc/postfix/pop-before-smtp-logins.db
popbsmtpd: My networks ( 1 ) 192.168.1.
popbsmtpd: My networks ( 2 )
popbsmtpd: My networks ( 3 )
popbsmtpd: My networks ( 4 )
popbsmtpd: Auth. duration: 30 minutes
popbsmtpd: Sleep duration: 3600 seconds
popbsmtpd: Log facility: LOG_MAIL
popbsmtpd: Log level: 3
popbsmtpd: Protocol scheme #1 - secure-pop
popbsmtpd: Enabled: Yes
popbsmtpd: Multi-line login: Yes
popbsmtpd: Daemon: stunnel
popbsmtpd: String: spop3 connected from
popbsmtpd: IP daemon: stunnel
popbsmtpd: IP string: spop3 connected from
popbsmtpd: IP scan: spop3 connected from %[^:]:%*d
popbsmtpd: User daemon: spop3
popbsmtpd: User string: Login user=
popbsmtpd: User scan: Login user=%s host=%*s [%*[^]]]
popbsmtpd: Failed login daemon: spop3
popbsmtpd: Failed login string: Login failure user=
popbsmtpd: Protocol scheme #2 - <not configured>
popbsmtpd: Protocol scheme #3 - <not configured>
popbsmtpd: Protocol scheme #4 - <not configured>
popbsmtpd: Wrote pid 3464 to /var/run/popbsmtpd.pid
popbsmtpd: Opened source log /var/log/popopbsmtpd: Opened authorization DB /etc/postfix/pop-before-smtp.db
popbsmtpd: Opened login DB /etc/postfix/pop-before-smtp-logins.db
popbsmtpd: Start monitoring for POP logins (non-daemon) -- version 0.5.2 p-imap-login.log
popbsmtpd: Expiry tests: Current time 2002/12/22 10:14:25 (1040573665),
Cutoff time 2002/12/22 09:44:25 (1040571865)popbsmtpd: Waiting for event;
timeout in 3600 seconds
Sorry for another lengthy message. I also attached my popbsmtpd.conf. I
hope you don't mind me asking for help like this. I feel really bad.
Thanks again.
-Larry
>
> I hope this helps; let me know how you succeed. If you can't get it
> going, send me the logging output and the configuration file.
>
> Regards,
> Marcus Redivo
>
> Larry Nguyen said:
>> Marcus,
>>
>> Thought I won't need popbsmtpd until now :) I went through your
>> how-to, tested each step successfully, i.e, manually add the IP into
>> pop-before-smtp, regenerate the database, send a test message
>> successfully, edit syslog-ng.conf, able to see user login when doing
>> cat /var/log/pop-imap-login.log.
>>
>> I did edit main.cf to set the 2 tests smtpd_client_restrictions and
>> smtpd_recipient_restricions to include check_client_access
>> hash:/etc/postfix/pop-before-smtp, reload postfix, start popbsmtpd.
>> When trying to send a message I received
>>
>>
>> Dec 21 09:37:37 myvietnam postfix/smtpd[2499]: reject: RCPT from
>> rrcs-sw-24-153-136-148.biz.rr.com[24.153.136.148]: 554
>> <larrynguyenus yahoo.com>: Recipient address rejected: Relay access
>> denied; from=<rhs myvietnam.org> to=<larrynguyenus yahoo.com>
>>
>> Below is my postconf | grep smtpd
>>
>> smtpd_banner = $myhostname ESMTP $mail_name
>> smtpd_client_restrictions = permit_mynetworks,check_client_access
>> hash:/etc/postfix/pop-before-smtp,hash:/etc/postfix/access
>> smtpd_delay_reject = no
>> smtpd_error_sleep_time = 5
>> smtpd_etrn_restrictions =
>> smtpd_hard_error_limit = 100
>> smtpd_helo_required = yes
>> smtpd_helo_restrictions =
>> smtpd_junk_command_limit = 1000
>> smtpd_recipient_limit = 1000
>> smtpd_recipient_restrictions = permit_mynetworks,check_client_access
>> hash:/etc/postfix/pop-before-smtp,reject_maps_rbl,check_relay_domains
>> smtpd_restriction_classes =
>> smtpd_sasl_auth_enable = no
>> smtpd_sasl_local_domain = $myhostname
>> smtpd_sasl_security_options = noanonymous
>> smtpd_sender_restrictions =
>> permit_mynetworks,hash:/etc/postfix/access,reject_unknown_sender_domain
>> smtpd_soft_error_limit = 10
>> smtpd_timeout = 300
>>
>> For some reason popbsmtpd enable relaying after user log in then
>> disable it right away. Please see below.
>>
>>
>> Dec 21 09:29:36 myvietnam spop3[2482]: Login user=rhs host=localhost
>> [127.0.0.1] nmsgs=0/0
>> Dec 21 09:29:36 myvietnam popbsmtpd[2456]: Relaying ENABLED (started)
>> for user rhs at 24.153.136.148
>> Dec 21 09:29:36 myvietnam popbsmtpd[2456]: Relaying DISABLED for
>> 24.153.136.148
>> Dec 21 09:29:36 myvietnam spop3[2482]: Logout user=rhs host=localhost
>> [127.0.0.1] nmsgs=0 ndele=0
>>
>> I apologize for the long email and really do appreciate your help.
>>
>>
>> -Larry
This archive was generated by hypermail 2.1.6 on 2005-11-05 00:15:06 PST
| 
